You wouldn’t bathe in dirty water, would you? But you’d be surprised how many of us will clean our clothes in a dirty machine! So if your washing machine is looking a bit worse for wear and you’re convinced that your whites are not coming out quite so bright, try our top tips on how to clean a washing machine. You can bring back its cleaning power with six little jobs designed to make washing day that little bit better.
Get more advice on keeping your home spick and span from our care and cleaning category
Giving your washing machine an MOT will banish mould, bad smells and clothes-ruining residues – and potentially prevent it breaking down, too.
How to clean a washing machine
1. Clean the detergent drawer
The detergent drawer can be a haven for germs, encrusted washing powder and mould and it’s a little space that can get dirty faster than you would imagine, considering this is where you put the formula designed to clean your clothes and linens!
For the best results, remove the entire drawer and set to work with an old toothbrush and an ordinary domestic cleaner. If you are unsure about how to remove your drawer, consult the user manual. Don’t forget to clean the drawer cavity too. It’ll be spotless in mere minutes and your clothes will feel fresher instantly.
2. Clean the filter
The debris filter is there to protect your washing machine’s pump by stopping lint, stray tissues, coins and general dirt in its tracks. That means that, like the detergent drawer, it’s a place where germs collect. It is also warm and humid so provides an ideal breeding ground for dodgy smells to infiltrate the machine… and your laundry.
The solution? Empty it regularly to remove the fluff and dirt that has gathered inside. The washing machine filter is usually located along the lower edge of the machine, behind a hinged cover. Check your user manual if unsure. Carefully free the emergency drain tube and place a bowl or pan on the floor below it.
Unplug and allow any trapped water to drain off. Replace the plug, remove the bowl and lay a towel on the floor. Carefully unscrew or release the filter cover. Any trapped debris should run out with the trapped water, but check inside the cavity to be sure. Wipe around with a cloth, clean any components and replace the cover. Check again that you have replaced the cover properly to prevent any accidental leaks.
What about your kitchen appliances? READ: How to clean a kettle the cheap and easy way
3. Clean the drum
Even if the inside of your washing machine looks sparkling clean, it’s probably not. There are lots of nooks and crannies where germs can hide and fester. The best thing to do is run an empty wash every couple of months.
Cleaning expert Lynsey Queen of Clean recommends using soda crystals: ‘Pour 500mls into the drum directly and pop it on the hottest wash that your washing machine will.’
A hot wash should preferably be 60 degrees. This should kill germs, remove odours and stop soap scum and limescale building up in hard-to-see places.
4. Prevent bad smells
Ever opened your washing machine door to be greeted with an unpleasant, musty smell? This may be because the damp conditions of a freshly-run machine are perfect for mould to grow.
Leaving the washing machine door open slightly after washes allows air to circulate around the drum, which helps stop germs breeding and reduces the associated damp scents. This is even more important during warmer weather in the summer.
Make sure your outside drain is also kept clear of debris and regularly cleaned as odours can feed back up into the machine.
5. Clean the door seal
When you’re pushing your washing into the machine and pulling it back out again damp, it’s easy to forget about the space between the door and the drum. That rubber seal that’s stopping water from spilling out on to your kitchen or utility room floor is also a place for excess detergent and dirt to hide. If you let this build up, it does turn into mould and becomes increasingly difficult to remove.
Before and after each wash, use a damp cloth to give the seal a gentle wipe and that should be enough to keep this part of the machine in good nick. It also means your clean washing doesn’t pick up fresh dirt as you take it out to dry.
6. Use the right detergent
When you’re faced with the mind-blowing array of detergents lined up on the supermarket shelves, it’s easy to think only about the effect they have on your clothes. Interestingly extra suds and liquid softeners have been linked to leaving a residue in the machine that may contribute to bad smells and mould.
In short, if you want to be kinder to your washing machine (and help it last longer) use powder rather than liquids.
7. Clean your washing machine regularly
The best way to get the smell out of a washing machine, is to prevent it getting smelly in the first place. That means adding cleaning the washing machine to your list of household chores.
Cleaning guru Lynsey Crombie recommends cleaning your washing machine every other week.
‘I clean my washing machine every other week. Especially in the summer when it’s hot, and your washing machine starts to smell more easily,’ she explains.
If you can’t keep you with that, try to do it at least once a month. Just try not to wait until it starts smelling too bad.
Want more useful care and cleaning tips? READ: How to clean a dishwasher – for sparkling crockery every time
If your washing machine still smells funny there is a possibility it’s beyond saving and you may need to buy a new washing machine.
Before you throw the towel in (pun intended) try out these handy tips on how to clean a washing machine, because it might just need some TLC to get your whites whiter.
The post How to clean a smelly washing machine – banish mould, bad odours and residues appeared first on Ideal Home.